How To Load Arrow T50 Staple Gun

Published 2 August 2026

Loading an Arrow T50 staple gun is a crucial step to ensure your projects are completed seamlessly. The process is simple and requires only a few steps. By following these instructions carefully, you'll be able to swiftly load the staple gun and start tackling your fastening tasks with precision and efficiency.

To begin, gather the necessary materials: your Arrow T50 staple gun, a pack of compatible staples, and a pair of needle-nose pliers or a small screwdriver. Locate the staple loading slot at the bottom of the gun's handle. Squeeze the release lever on the top of the gun to open the loading slot. Carefully insert the pack of staples into the slot, ensuring that the staples are facing the correct direction. Push the staples down until they reach the end of the slot.

Loading the T50 Staple Gun

The Arrow T50 staple gun is a versatile and easy-to-use tool for a variety of tasks, from upholstery to woodworking. To ensure that your staple gun is always ready to use, it's important to know how to load it properly. Follow these steps to load the T50 staple gun in just a few minutes:

Materials You'll Need:

• Arrow T50 staple gun
• T50 staples

Step-by-Step Instructions:

1. Safety First: Always wear safety glasses when using a staple gun. Make sure the staple gun is unloaded and the safety is engaged before handling.

2. Locate the Loading Mechanism: On the bottom of the staple gun, you'll find a small lever or button that releases the loading mechanism. Push or slide the lever to open the magazine.

3. Insert the Staples: Take a handful of T50 staples and insert them into the magazine, ensuring that they are facing the correct direction. The staples should be aligned with the small guide grooves inside the magazine.

4. Close the Magazine: Once the magazine is full, close it by pushing or sliding the lever back into place. Make sure that the magazine is securely locked to prevent staples from falling out.

5. Test the Staple Gun: Before using the staple gun on your project, test it on a piece of scrap material to ensure that it is working properly. If necessary, adjust the tension knob to control the depth of the staples.

With these simple steps, you can easily load your Arrow T50 staple gun and get back to your project. Remember to always follow safety precautions and refer to the manufacturer's instructions for additional guidance.

Troubleshooting Tips:

Understanding Staple Compatibility

Arrow's T50 staple gun requires specific staple sizes to function correctly. The following table outlines the compatible staple sizes:

Note that using incorrect staple sizes can damage your staple gun and potentially result in malfunctions. Always ensure that you match the staple length and leg length to the specifications of the T50 staple gun.

When selecting staples, consider the material and thickness of the objects you will be stapling to determine the appropriate staple length. Longer staples offer greater holding power for thicker materials, while shorter staples may be more suitable for thinner surfaces.

Understanding staple compatibility is crucial for maximizing the performance and lifespan of your Arrow T50 staple gun. By using the correct staple sizes, you can ensure efficient and reliable stapling results.

Inserting Staples into the Magazine

1. Open the Magazine Latch: Locate the magazine latch on the back of the staple gun. Press it down and pull the magazine forward to open it.

2. Load the Staples: Insert a strip of staples into the magazine, ensuring that the pointed ends face the front of the gun. Push the staples down until they are flush with the bottom of the magazine.

3. Close the Magazine and Insert it into the Gun:

• Align the Magazine: Ensure that the magazine is aligned with the guide rails on the gun.
• Push the Magazine In: Slide the magazine back into the gun until it clicks into place.
• Engage the Latch: Release the magazine latch to secure the magazine.

4. Check the Staple Count: The staple gun typically has a small window on the side or back that shows the number of remaining staples. Check the window to ensure the staple gun is loaded and ready to use.

Adjusting the Depth Settings

The Arrow T50 staple gun features adjustable depth settings, allowing you to customize the depth of the staples to suit the thickness of the materials you're working with. To adjust the depth, follow these steps:

Step 1: Locate the Depth Wheel

Look for a large wheel on the front of the staple gun. This is the depth wheel.

Step 2: Turn the Wheel

Turn the depth wheel clockwise to increase the depth of the staples or counterclockwise to decrease it.
The deeper you want the staple to go into the material, the higher the number you should set the depth wheel to. Conversely, the lower the number, the shallower the staple will be driven.

Step 3: Test the Depth

To ensure the depth is adjusted correctly, fire a few staples into a scrap piece of material. Adjust the depth wheel as needed until you achieve the desired staple depth.

Depth Wheel Settings

The following table provides a general guideline for the appropriate depth wheel settings for different material thicknesses:

Clearing Jams and Misfires

1. Identify the Jam

Inspect the staple gun to identify where the jam is located. Check the magazine, staple tray, and firing mechanism.

2. Remove the Magazine

Press the magazine release button and slide the magazine out.

3. Clear the Staple Tray

Remove any jammed staples from the staple tray using pliers or a similar tool.

4. Inspect the Firing Mechanism

Examine the firing pin and anvil for any debris or misalignment. Clean or adjust as necessary.

5. Reload the Magazine

Insert fresh staples into the magazine, ensuring they are inserted correctly.

6. Reinsert the Magazine

Slide the magazine back into place until it clicks into position.

7. Clear Misfires

If the staple gun misfires, repeat steps 1-6. Additionally:

8. Retest the Staple Gun

Pull the trigger to test the staple gun and confirm it is functioning properly.

Maintaining the Staple Gun

To ensure the longevity and optimal performance of your Arrow T50 staple gun, regular maintenance is essential. Follow these steps to keep your staple gun in top condition:

1. Lubricate Regularly

Apply a small amount of oil or lubricant to the moving parts of the staple gun, such as the plunger and trigger. This will reduce friction and extend the lifespan of the tool.

2. Clean the Staple Guide

Use a wire brush or compressed air to remove any debris or staples that may have accumulated in the staple guide. This will prevent jamming and ensure smooth operation.

3. Check the Plunger Spring

The plunger spring is responsible for driving the staples. If it becomes weak or damaged, the staples will not be driven properly. Inspect the spring regularly and replace it if necessary.

4. Inspect the Staples

Use high-quality staples that are compatible with your staple gun. Damaged or bent staples can cause jamming and damage the tool.

5. Store Properly

When not in use, store the staple gun in a dry, clean place. Avoid exposing it to moisture or extreme temperatures.

6. Sharpen the Piercing Point

Over time, the piercing point of the staple gun may become dull. Use a file or sharpening stone to restore its sharpness and ensure clean staple penetration.

7. Replace Worn Parts

If any parts of the staple gun become worn or damaged, replace them promptly. This will prevent further issues and maintain the efficiency of the tool.

8. Service by a Professional

For optimal performance and longevity, it is recommended to have your staple gun serviced by a professional technician every few years. They can perform a thorough inspection, clean, lubricate, and replace any worn parts as needed.

| Service Interval | Action |

|---|---|

| Every 6 months | Lubrication, cleaning |

| Every 12 months | Plunger spring inspection, staple guide cleaning |

| Every 2 years | Piercing point sharpening, worn parts replacement |

| Every 3-5 years | Professional service |

Safety Considerations

Before operating any power tool, it is crucial to prioritize safety. Here are some key considerations when using an Arrow T50 staple gun:

1. Wear appropriate safety gear: Always wear eye protection, gloves, and earplugs when using a staple gun to prevent injuries from staples or debris.
2. Handle the gun with care: Keep the staple gun pointed away from yourself and others when not in use. Never carry a loaded staple gun, and keep it unloaded when storing it.
3. Check the staples regularly: Ensure that the staples are straight and fully seated in the magazine. This prevents jamming and ensures proper functioning.
4. Clear the work area: Remove any obstacles or loose materials from the work area to prevent accidental firing or damage to property.
5. Use the correct staple size: Refer to the staple gun manual or the table below to select the appropriate staple size for your project.
6. Avoid overloading the magazine: Do not overstuff the magazine, as this can lead to jamming and damage to the staple gun.
7. Keep the gun clean: Regularly clean the staple gun to remove debris or jammed staples. This ensures optimal performance and prolongs its lifespan.
8. Unplug the gun before maintenance: Always unplug the staple gun before any maintenance or repairs. This prevents accidental discharge and potential injury.
9. Store the gun safely: When not in use, store the staple gun in a secure location out of reach of children or unauthorized individuals.

Loading the Arrow T50 Staple Gun

1. Gather the necessary materials: Arrow T50 staple gun, staples, and a flat surface.

2. Open the staple gun by lifting the handle fully.

3. Locate the staple loading channel at the rear of the staple gun.

4. Insert the staples into the loading channel, ensuring they are facing the correct direction.

5. Push the staples all the way in until they are flush with the loading channel.

6. Close the handle to engage the staples.

7. Your staple gun is now loaded and ready to use.

Troubleshooting Common Issues

1. Staple is jammed or fails to fire

2. Staple does not penetrate the material

3. Staple gun is difficult to open or close

4. Safety lock is not engaging

5. Staple gun is leaking oil

6. Staple gun is not firing consistently

7. Staple gun fires multiple staples at once

8. Staple gun is overheating

9. Staple gun is not ejecting used staples

10. General maintenance tips

How to Load an Arrow T50 Staple Gun

Loading an Arrow T50 staple gun is a simple and straightforward process. Follow these steps to do it correctly:

1. Open the staple gun. Push the release lever on the back of the staple gun and pull the nosepiece forward.
2. Insert the staples. Place a strip of staples into the staple magazine, ensuring that the staples are facing in the correct direction.
3. Close the staple gun. Push the nosepiece back into place and release the release lever.
4. Test the staple gun. Staple a piece of scrap material to make sure the staple gun is working properly.

People Also Ask

How do you know which way to insert staples into a staple gun?

The staples should be inserted so that the pointed ends are facing down towards the material you are stapling.

What type of staples does an Arrow T50 staple gun use?

The Arrow T50 staple gun uses T50 staples, which are 1/2-inch long and have a 1/4-inch crown.